Panning
Gold panning is a mostly manual technique of sorting gold form black sands. Wide, shallow pans are filled with sand and gravel that may contain gold. Water is added and the pans are shaken, sorting the gold from the gravel and other material that are in the pan. As gold is much denser than rock, it quickly settles to the bottom of the pan. The silt is usually removed from stream beds in gold bearing locations, often at a bend in the stream, or resting on the bedrock layer of the stream, where the weight of gold causes it to separate out of the water flow. This type of gold found in streams or dry streams are called placer gold deposits.
Gold panning is the easiest technique for finding gold, but is not commercially viable for extracting gold from large deposits, except where labor costs are very low and/or gold traces are very substantial. It is often marketed as a tourist attraction on former goldfields. Before production methods can be used, a new source must be identified and test panning is a good way to identify placer gold deposits so that they may be evaluated for commercial viability. A good placer gold location can be worked with the use of a dry washer, highbanker, dredge, or sluice box.
Metal detecting:
Using a metal detector for finding gold. Using a piece of electronic equipment called a metal detector, a person may walk around area systematically scanning below the surface to find gold nuggets. If the meter gives a positive reading a quantity of gold may be present up to a meter below the surface being scanned at the time depending on the type of detector used. This technique is very easy to operate, highly mobile, and very popular among gold diggers for finding nuggets. You can find a good detector on a gold prospecting auction site.
Sluicing:
Using a sluice box to extract gold from placer deposits has been a common practice in prospecting and small-scale mining throughout history. A sluice box is essentially a man-made channel with riffles set in the bottom to collect gold. The riffles are designed to create dead zones in the current to allow gold to drop out of suspension. The box is placed in the stream to catch water-flow and gold bearing material is placed at the top of the box. The material is carried by water through the box where gold and other heavy materials including black sands settles out behind the riffles. Lighter material flows out of the box as tailings.
Larger commercial placer mining operations employ screening plants or trommels to remove the larger alluvial materials such as boulders and gravel before concentrating in a sluice box or jig plant. These operations typically include diesel powered earth moving equipment including excavators, dozers, wheel loaders and rock trucks.
Dredging:
Other larger scale dredging operations take place on exposed river gravel bars at seasonal low water. These operations typically use a land based excavator to feed a gravel screening plant and sluicebox floating in a temporary pond excavated in the gravel bar and filled from the natural water table. Pay gravel is excavated from the front face of the pond and processed through the floating plant, with the gold trapped in the onboard sluicebox and tailings stacked behind the plant, steadily filling in the back of the pond as the operation moves forward. This kind of gold mining is characterized by its low cost, as each rock is moved only once, as well as by its low environmental impact, as no stripping of vegetation or overburden is necessary, and all process water is fully recycled. These operations are typical on New Zealand's south island and in the Klondike region of Canada.
Hard rock mining:
Hard rock gold mining is done when the gold is encased in rock, rather than as particles in loose gravels. Sometimes open-pit mining is used, such as the Ft. Knox Mine in central Alaska. Barrick Gold Corporation has one of the largest open-pit gold mines in North America, located on its Goldstrike property in northeastern Nevada. Other gold mines use underground mining, where the ore is extracted through tunnels or shafts. Hard rock mining produces most of the world's gold.
Byproduct gold mining:
Gold is also produced by mining in which it is not the principal product. Large copper mines, such as the Bingham Canyon mine in Utah often recover considerable amounts of fine gold and other metals along with the copper. Some sand and gravel pits, such as those around Denver, Colorado, may recover small amounts of gold in their washing operations.
Gold ore processing:
In placer mines, the gold is recovered by gravity separation. For hardrock mining, other methods are usually used.
Cyanide process;
Cyanide extraction of gold may be used in areas where fine-gold bearing rocks are found. Sodium cyanide solution is mixed with finely-ground rock that is proven to contain gold and/or silver, and is then separated from the ground rock as gold cyanide and/or silver cyanide solution. Zinc is added to the solution, precipitating out residual zinc, as well as the desirable silver and gold metals. The zinc is removed with sulfuric acid, leaving a silver and/or gold sludge that is generally smelted into an ingot that is shipped to a metals refinery for final processing into 99.9999% pure metals.
The cyanide technique is very simple and straightforward to apply and a popular method for low-grade gold and silver ore processing. Like most industrial chemical processes, there are potential environmental and personal hazards presented with this extraction method in addition to the high toxicity presented by the cyanide itself. This was seen in the environmental disaster in Central-Eastern Europe in year 2000, when during the night of 30 January, a dam at a goldmine reprocessing facility in Romania released approximately 100,000 m³ of wastewater contaminated with heavy metal sludge and up to 120 tons of cyanide into the rivers of Tisza.
History of gold mining:
